SILANE-BASED INJECTABLE DAMP PROOF COURSE (DPC) FOR RISING DAMP TREATMENT
SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp. SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D “Injection of masonry in order to avoid capillary moisture content”.
- Easy to install (low risk for operative error, not so dependent on operative skills)
- 1-component, ready to use
- Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity)
- No need for preliminary watertight sealing around the injection holes (as with pressure systems)
- Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems)
- Consistent application rate (easy to calculate the amount of material that will be required)
- Does not require a special expensive pump
- Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls, cavities or service ducts)
- Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials)
- Low hazard, water based - non-caustic, non-flammable - not injected under pressure
- Very low wastage
- Small waste disposal
- No risk of increased efflorescence (as with siliconate rising damp treatments)
| Product Volume | 310.00 ml |
Find out more
Sikamur Injecto Cream 310ml Cartriage
SILANE-BASED INJECTABLE DAMP PROOF COURSE (DPC) FOR RISING DAMP TREATMENT
SikaMur® InjectoCream-100 is a new concept for the control of rising damp. SikaMur® InjectoCream-100 is a water repellent cream, packed in a 300 ml cartridge. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun - no special injection pump required. Once injected into the mortar course, SikaMur® InjectoCream-100 will diffuse within the damp wall to form a Damp Proof Course (DPC), will allow the wall to dry and block future rising damp. SikaMur® InjectoCream-100 complies with the requirements of WTA Guideline 4-4-04/D “Injection of masonry in order to avoid capillary moisture content”.
- Easy to install (low risk for operative error, not so dependent on operative skills)
- 1-component, ready to use
- Fast to install (no ‘double drilling’, no waiting for liquid to penetrate under pressure or gravity)
- No need for preliminary watertight sealing around the injection holes (as with pressure systems)
- Fast to inject (no waiting times required to pump in the material compared to pressure injection systems and no refilling as with gravity fed injection systems)
- Consistent application rate (easy to calculate the amount of material that will be required)
- Does not require a special expensive pump
- Spillage & mess virtually eliminated from the site (no problem with fluids flooding through party walls, cavities or service ducts)
- Concentrated formula with approx. 80 % active ingredients (introduces a lower quantity of inactive carrier into the wall - much more effective results compared to less concentrated materials)
- Low hazard, water based - non-caustic, non-flammable - not injected under pressure
- Very low wastage
- Small waste disposal
- No risk of increased efflorescence (as with siliconate rising damp treatments)
| Product Volume | 310.00 ml |